* fix profile reference for Creality
* fix profile reference for Blocks
* fix profile reference for OrcaArena
* fix profile reference for re3D
* fix profile reference for Chuanying
* fix profile reference for Prusa
* fix profile reference for Wanhao France
* fix profile reference for MagicMaker
* fix profile reference for Afinia
Remove the ABS/ABS+/PLA/TPU/Value ABS/Value PLA filament presets that referenced the non-existent "Afinia H400 Pro" printer. The real printer is "Afinia H+1(HS)", already served by the @HS filament variants.
* fix profile reference for Comgrow
Remove the orphaned "0.20mm Standard @Comgrow T500 1.0" process preset and its process_list entry. Its only compatible printer "Comgrow T500 1.0 nozzle" never existed (the T500 model defines nozzle diameters 0.4/0.6/0.8 only).
* always run check_preset_references
* profiles: enforce globally-unique, per-vendor-namespaced setting_id
Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone
appeared in 1557 files), so setting_id was not globally unique. This
namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space.
- Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces.
- Assign each other vendor a 2-char prefix (first+last letter, collision
resolved) and renumber every instantiated preset to <PREFIX><NNNN>.
- Strip setting_id from base profiles (instantiation:false) per Bambu's
convention; assign one to instantiated presets that lacked it.
- Remove the pre-existing misspelled "settings_id" key (91 files).
- filament_id is left untouched (it is a per-material id).
- Add one-time migration script scripts/assign_vendor_setting_ids.py with a
persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze
existing ids; only new vendors/profiles get new ids.
- Bump version in each changed vendor index file.
- Extend scripts/orca_extra_profile_check.py with a CI guard: global
uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo.
7425 profile files changed across 61 vendors; 0 cross-vendor collisions;
validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces
untouched.
* profiles: add setting_id authoring guide for new vendors / profiles
* profiles: drop in-repo README; setting_id guide now lives in the wiki
* profiles: derive setting_id deterministically from vendor/type/name
* bump profile version
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
* bugfix for TPU filament overrides
* higher voluemetric flow
* bugfix for to high speed at internal solid infill
* Update Prusa.json
* updated firmware check and nozzle settings
* bugfix speed and standard for 0,15mm profiles of the 0.4mm nozzle
* variables not defined in orcaslicer
* bug fix volumetric speed, wrong value
* added high flow base process
* added highflow base process
* added first full draft of high flow profiles, further tests are necessary
* changed 0.35mm to 0.32mm for 0.6mm nozzle
* minor changes to initial layer speeds
* changed 0.35mm to 0.32mm for 0.6mm nozzle
* furcer changes on accelartion and speed
* added 0.35mm Standard @MK3.5 again for not breaking anythin for current users
* Update 0.35mm Standard @MK3.5.json
forgot to set the layer_height after creation of the 0.35mm profile
* minor fixes in filament overrides
* added profiles for high flow nozzles on the Prusa MINIIS
* added fan_speedup_time for MINIIS and MK3.5
* changes to support interface, pattern and distance
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* Replace prusa printer images with standard sizes and aspect ratio
* Rename Prusa Mini IS to specify the IS in the name
* Add missing prusa CORE One in the preset dialog and reorder prusa printers
* updated pictures to 320px
* bugfix for TPU filament overrides
* higher voluemetric flow
* bugfix for to high speed at internal solid infill
* Update Prusa.json
* updated firmware check and nozzle settings
* bugfix speed and standard for 0,15mm profiles of the 0.4mm nozzle
* variables not defined in orcaslicer
* bug fix volumetric speed, wrong value
* added high flow base process
* added highflow base process
* added first full draft of high flow profiles, further tests are necessary
* changed 0.35mm to 0.32mm for 0.6mm nozzle
* minor changes to initial layer speeds
* changed 0.35mm to 0.32mm for 0.6mm nozzle
* furcer changes on accelartion and speed
* added 0.35mm Standard @MK3.5 again for not breaking anythin for current users
* Update 0.35mm Standard @MK3.5.json
forgot to set the layer_height after creation of the 0.35mm profile
* First set of fixes
* Add FLEX filament to PrintConfig.cpp
* Add new FLEX filament profiles to main Prusa json
* Comment out M104.1 code
* Revert "Comment out M104.1 code"
This reverts commit 831414adb7.
* bugfix for TPU filament overrides
* higher voluemetric flow
* bugfix for to high speed at internal solid infill
* Update Prusa.json
* updated firmware check and nozzle settings
* bugfix speed and standard for 0,15mm profiles of the 0.4mm nozzle
* variables not defined in orcaslicer
* Whitespace cleanup in Prusa profile
```
$ diff -u Prusa.json <(jq --indent 4 < Prusa.json) | wc -l
0
```
* Add Prusa MK4S profiles
There were generated from the PrusaSlicer profiles[0] using some scripts
which try to faithfully convert the profiles[1]. The high flow nozzle
settings have been modeled as a separate printer model.
A few things I'm aware of that haven't been converted:
- Filament multi-material settings (eg loading speeds)
- High-flow and abrasive nozzle check in gcode, which, as far as I
know, isn't available in the current firmware anyways
I've also found that disabling z-hop on layer change in OrcaSlicer seems
more similar to the behavior in PrusaSlicer (which allows travel
distance limitations to override that setting), so I've disabled that.
Fixes#7391
[0]: 0bca90da13/resources/profiles/PrusaResearch.ini
[1]: https://github.com/rcloran/SuperSlicer_to_Orca_scripts/tree/20d2881
* added Prusa Mini with Input Shaper to profiles
* refactoring to more reusable settings
* added more processes, changed settings
* Update 0.15mm Speed @MINIIS.json
* Update 0.10mm Speed @MINIIS.json
* changed to cubic because of speed
* further changes after reviewing prusa slicer settings
* simplified machine settings
* retraction speeds according to prusa slicer
* changed max flow according to prusa slicer
* after clearification at the prusaslicer repository M900 got removed
* precise wall per default
* enable reverse overhang on odd by default
* added settings from prusa slicer
* changed cooling setings
* changed default to inner-outer-inner wall
inner-outer-inner gives pretty good overhangs with better surface
* new profiles for bigger nozzles, changed some cooling settings according to prusaslicer
* profiles for different nozzles sizes, better speed settings
* initial layer height was wrong
* wrong initial layer height
* set the correct accelerations
* changed firmware version number
* using pressure advance UI setting instead of custom filament g-code
* Update Prusa Generic PC.json
* Update Prusa Generic PC.json
* changed max flow for PC
* added PVA filament profiles
* bug fix in filament loading
* changed line width according to prusa slicer
* changed heatbed temperature for Minis capabilities
* added Prusa Mini with Input Shaper to profiles
* refactoring to more reusable settings
* added more processes, changed settings
* Update 0.15mm Speed @MINIIS.json
* Update 0.10mm Speed @MINIIS.json
* changed to cubic because of speed
* further changes after reviewing prusa slicer settings
* simplified machine settings
* retraction speeds according to prusa slicer
* changed max flow according to prusa slicer
* after clearification at the prusaslicer repository M900 got removed
* precise wall per default
* enable reverse overhang on odd by default
* added settings from prusa slicer
* changed cooling setings
* Ender 3 - All nozzles and Quality Profiles
Ender 3 Profiles.
0.20 Nozzle
0.40 Nozzle
0.60 Nozzle
0.80 Nozzle
0.12 to 0.24 Quality Profiles for every Nozzle in Process Folder
* all
all
* Ender 3 Profiles
Ender 3 Profiles for: 0,2;0,4;0,6;0,8
5 Different and independent Quality profiles for each Nozzle.
Fine, Optimal, Standard, Draft and Superdraft
* aa
aa
* aa
aa
* aa
aa
* Prusa Mk3s Profiles
Prusa Mk3s Profiles
* Mk3s FIXED
mk3s FIXED
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
