Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
* Fix start gcode setting bed temp to nozzle temp for Raise3D Pro3 Plus left nozzle
Edited Raise3D Pro3 Plus 0.4 nozzle (Left).json
Replaced S{nozzle_temperature_initial_layer[0]} with S[bed_temperature_initial_layer_single] for M140 and M190
* Fix start gcode setting bed temp to nozzle temp for Raise3D Pro3 left nozzle
Edited Raise3D Pro3 0.4 nozzle (Left).json
Replaced S{nozzle_temperature_initial_layer[0]} with S[bed_temperature_initial_layer_single] for M140 and M190
* Update Raise3D Pro3 Plus 0.4 nozzle (Left).json
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
