Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
Using my Ender 3 V3 SE I noticed weird printing behaviour. Searching for
the cause, I found that the default layer height for a 0.2mm nozzle for
the printer was set to 0.08mm min and 0.32mm max, which are the default
20%/80% values for a 0.4mm nozzle. This commit changes the values for
all Creality printer which had not a reasonable default value for 0.2mm,
0.6mm and 0.8mm nozzles to 20% min and 80% max.
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Replace M109 S[material_print_temperature_layer_0] with M109 S[first_layer_temperature]
* Change line width to match nozzle
* Change line_width for Ender-3 S1 Plus
* Update creality_cr10se_buildplate_model.stl
* Change line width to match nozzle size (Ender3v3SE)
* Fix Ender-3 S1 Plus 0.8 bed size
* Enable Z-hop for Ender-3 S1 Plus
* Trying something
* Update creality_ender3s1plus_buildplate_model.stl
* Fix CR-10 SE print size
* Various Flying Bear fixes
* Try fixing error
* Revert "Try fixing error"
This reverts commit e42e016e4a.
* Add minor Ender-3 V3 KE improvements
* Maybe this will fix the error?
* Revert "Maybe this will fix the error?"
This reverts commit 5e7873251b.
* Revert "Various Flying Bear fixes"
This reverts commit babca572dc.
* Fix CR-10 SE G-Code
Recommended by @bkonosky
* Minor changes to Ender-3 V3 KE
* Probe when bed is heated (Ender-3 V3 KE)
* Minor changes to Ender-3 V3 KE
* Fix oozing (Ende-3 V3 KE)
* Change retraction settings
* Use different retraction settings
* Revert "Use different retraction settings"
This reverts commit 854decf848.
* try this
* Remove "role_based_wipe_speed": "0",
* Add changes from CR-10 SE Config #4966
* Add "role_based_wipe_speed" : "0",
* Up retraction speed
* Missed this
* Resolve merge conflicts
* Resolve merge conflicts
* Change retraction & wipe speed
* Revert line removal
* Change wipe_speed to 200mm/s
* Forgot the 0.16mm
* Add BED_MESH_CALIBRATE PROBE_COUNT=6,6
* Improve for Matte PLA
* Compensate for fan speed
* Fix CANCEL_PRINT bug
* Move SET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 to start g-code
* Disable infill combination for 0.2 & 0.24
* Fix end G-Code
* Disable arc fitting
This fixes the merge conflict
* temp
* Revert "temp"
This reverts commit 4bbc028ade.
* Add Creality Ender-3 S1 Plus
* Misc
* Fix nozzle_diameter
* Add printer_variant value
* Change build plate model/texture to use Ender-3 V3 SE
* Enable mesh leveling
* Up max travel acceleration to 5000
* Enable infill_combination
* Add Draft profiles
* Change buildplate model/texture
* Fix build plate model
* Add retraction & detraction speed & change retraction length
* Add filament_ to the beginning
* Revert retraction & detraction speed & retraction length
* Tests
Trying to change retract and detract speed as well as retraction length
Also trying to have Z-hop only happen on top layers
* Apply new values to other nozzles
* disable z_hop
* Lower build plate model
* Resolve merge conflicts
* temporarily remove Ender-3 S1 Plus
* Re-add Ender-3 S1 Plus
