Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
* Updated profile to match latest officlal BBL tweaks
Updated the profile for the P2S with several changes to match the latest machine gcode changes made by BBL:
- Added Ventobox support
- Added air purification at the end of the print. When exhaust fan controls are setup in the filament profile, this is skipped
- Disabled auxiliary_fan by default to fix the issue that it overrides auto cooling and heating managed by the printer. Enabling this in printer settings makes it behave as before if so desired
- Updated with other tweaks made by BBL
* Reverted one line in layer change code
Reverted one line in layer change gcode as it was causing issues and was bambu studio specific anyway. Filament change works exactly as expected now.
* Re-enabled soaking time
This was a personal change that sneaked in, but may be unwanted for other users who have been using Orca for this printer for a while.
* Fixed redundant homing command and moved enable input shaping up
Fixed some issues BBL made in their original startup code that executes one redundant homing command for people who disable ABL. Also moved up the enable input shaping command to make the startup sequence quieter.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
