Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
## Summary
Adds proper system profiles for the **Anycubic Kobra Neo** with 0.4mm nozzle (stock Marlin firmware).
This replaces the profiles from #12341 which had several issues:
- All files had `"from": "User"` instead of `"from": "system"` — causing profile loading failures
- No `inherits` or `type` fields — broke the inheritance chain
- Klipper-only gcode (not stock firmware)
- No `Anycubic.json` index entries — printer never appeared in the UI
- Cover image was 382x600 instead of 240x240 (displayed squashed)
- Profiles were subsequently removed in #12889
### Files added/modified
| File | Description |
|------|-------------|
| `machine/Anycubic Kobra Neo.json` | Base machine model (220x220x250mm) |
| `machine/Anycubic Kobra Neo 0.4 nozzle.json` | 0.4mm nozzle variant, stock Marlin gcode |
| `process/0.12mm Detail @Anycubic Kobra Neo 0.4 nozzle.json` | Detail process profile |
| `process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json` | Standard process profile |
| `process/0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle.json` | Standard process profile |
| `process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json` | Standard process profile |
| `filament/Anycubic PLA @Anycubic Kobra Neo 0.4 nozzle.json` | PLA filament profile |
| `Anycubic Kobra Neo_cover.png` | Resized to 240x240 |
| `Anycubic.json` | Added index entries for all new profiles |
### Approach
- Based on the working **Anycubic Kobra 2 Neo** profiles (similar hardware — direct drive, 220x220 bed)
- Start gcode uses `G29` for auto bed leveling (stock Kobra Neo probes fresh each print)
- Profiles use proper `"from": "system"` and `"inherits": "fdm_machine_common"` / `"fdm_process_common"` chains
- Buildplate model and texture from #12341 are already in the repo
### Testing
- Verified profiles load correctly in OrcaSlicer 2.3.2 (no errors in log)
- Printer appears in Printer Selection dialog with correct 240x240 cover image
- Process/filament presets appear when printer is selected
- **Note:** Start/end gcode adapted from Kobra 2 Neo for stock Marlin — testing on stock firmware by Kobra Neo owners would be appreciated
Closes the gap left by #12341 and #12889.
