Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
* Add .02 nozzle profiles
* Remove carbon fiber 0.2 profiles
* Flag Filament Types Correctly
* Add missing PC 0.2 profile
* Correct PLA nozzle name typo
* Tune supports for the thinner layer lines
* Pull in latest main branch updates
* Correct Support bottom distance
* Correct the numbering
* Add 0.25mm Nozzle Profiles
* Enable manual filament changing for all AnkerMake Printers
* Pull in latest main branch updates
* Remove extra white space from file name
---------
Co-authored-by: Geofrey Ward <Xelinor@mail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Bring over bed and cover files
* Initial refactored configuration file with placeholders for adding more nozzles
* Uniqueify filament profiles
* Initial refactored machine profiles
* Remove placeholders
* Correct machine selection flow
* Correct Typo
* Add placeholders to bring CE profile settings current with new format
* Fixes#3326
* Port 0.4 Normal Mode Profiles
* Port fast mode profiles
* Remove superfluous settings
* Migrate existing filament profiles
* Update available nozzles and default materials
* Remove 'with' from file names
* Remove 'with' from file names
* Correct support object distance default
* Correct transcription errors
* Correct transcription error
* Bring max_travel_detour_distance into convention with other profiles
* Replace old profiles with the refactored profiles
* Correct name used from Extra Draft to Superdraft
* Re-use original names so printer profiles don't break
---------
Co-authored-by: Geofrey Ward <Xelinor@mail.com>
* Remove retraction_length from common
M5c should never retract more then 0.8mm or it will clog
* Preserve M5 retraction length
Moved previous retraction length from core to M5
* Update Anker M5C retraction length to prevent clogs
Anything beyond a 0.8mm retraction length will clog the printer over time.
