Merged Orca-Flashforge 1.3 branch + fixes & optimizations

Added AD5X & G4P
Consolidated/Revised AD3, AD5M & G2S profiles
Commenced filament Filament ID & Setting ID corrections

resources/profiles/Flashforge/process/0.36mm Standard @FF G4P 0.6 nozzle.json

@@ -0,0 +1,64 @@
+{
+  "bottom_solid_infill_flow_ratio": "0.96",
+  "bridge_acceleration": "3000",
+  "brim_type": "auto_brim",
+  "enable_prime_tower": "1",
+  "exclude_object": "1",
+  "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+  "filter_out_gap_fill": "0",
+  "flush_into_support": "1",
+  "from": "system",
+  "instantiation": "true",
+  "compatible_printers": [
+    "Flashforge Guider4 Pro 0.6 nozzle"
+  ],
+  "infill_wall_overlap": "15%",
+  "inherits": "0.30mm Standard @Flashforge G3U 0.6 Nozzle",
+  "initial_layer_acceleration": "800",
+  "initial_layer_infill_speed": "60",
+  "initial_layer_line_width": "0.62",
+  "initial_layer_print_height": "0.3",
+  "initial_layer_speed": "40",
+  "initial_layer_travel_speed": "600",
+  "inner_wall_acceleration": "10000",
+  "inner_wall_line_width": "0.62",
+  "internal_bridge_flow": "0.96",
+  "internal_bridge_speed": "35",
+  "internal_solid_infill_acceleration": "8000",
+  "internal_solid_infill_line_width": "0.62",
+  "internal_solid_infill_speed": "120",
+  "is_custom_defined": "0",
+  "layer_height": "0.36",
+  "line_width": "0.62",
+  "name": "0.36mm Standard @FF G4P 0.6 nozzle",
+  "outer_wall_line_width": "0.62",
+  "overhang_2_4_speed": "50",
+  "overhang_3_4_speed": "30",
+  "overhang_4_4_speed": "12",
+  "overhang_speed_classic": "1",
+  "prime_tower_width": "45",
+  "prime_volume": "45",
+  "print_settings_id": "0.36mm Standard @FF G4P 0.6 nozzle",
+  "role_based_wipe_speed": "0",
+  "seam_gap": "10%",
+  "skirt_loops": "0",
+  "small_perimeter_speed": "35",
+  "sparse_infill_acceleration": "100%",
+  "sparse_infill_line_width": "0.62",
+  "sparse_infill_speed": "220",
+  "support_bottom_z_distance": "0.25",
+  "support_interface_filament": "0",
+  "support_line_width": "0.62",
+  "support_speed": "70",
+  "top_shell_thickness": "0.8",
+  "top_solid_infill_flow_ratio": "0.96",
+  "top_surface_acceleration": "3000",
+  "top_surface_line_width": "0.62",
+  "top_surface_speed": "100",
+  "travel_acceleration": "20000",
+  "travel_speed": "550",
+  "version": "2.1.1.0",
+  "wipe_speed": "50",
+  "wipe_tower_bridging": "10",
+  "wipe_tower_max_purge_speed": "120"
+}