Set Ironing angle setting to be a relative degree offset from top surface infill direction (#10841)

* Change ironing angle setting to be an offset angle from the top surface angle rather offset from the layer 0 angle that changes on each layer.

* Change Ironing angle offset range from [-1,359] to [0,359].
-1 is redundant because it is the same behavior as 0 offset.

* Change ironing_angle new default value to 0.

* Update existing print profiles' hardcoded ironing_angles from -1 to 0 to reflect new default value.

* Add migration for old -1 ironing_angle settings. Remove logic for -1 ironing_angle.

* Add u8 prefix for degree symbol string

* Use solid_infill_direction instead of infill_direction for top surface infill direction. Use calculate_infill_rotation_angle to add offset to solid_infill_rotate_template if used.

* Update quality settings wiki for Ironing

* Set f->is_using_template_angle when making ironing filler objects

* Update quality_settings_ironing link from #angle to #angle-offset

---------

Co-authored-by: Noisyfox <timemanager.rick@gmail.com>

resources/profiles/Anycubic/process/0.08mm HighDetail @Anycubic Kobra 3 0.4 nozzle.json

@@ -91,7 +91,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "zig-zag",
     "internal_solid_infill_speed": "200",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Anycubic/process/0.10mm Detail @Anycubic Kobra 3 0.2 nozzle.json

@@ -91,7 +91,7 @@
     "internal_solid_infill_line_width": "0.22",
     "internal_solid_infill_pattern": "zig-zag",
     "internal_solid_infill_speed": "120",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 3 0.4 nozzle.json

@@ -91,7 +91,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "zig-zag",
     "internal_solid_infill_speed": "200",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Anycubic/process/0.16mm Optimal @Anycubic Kobra 2 Pro 0.4 nozzle.json

@@ -91,7 +91,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "240",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "10%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.15",

resources/profiles/Anycubic/process/0.16mm Optimal @Anycubic Kobra 3 0.4 nozzle.json

@@ -91,7 +91,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "zig-zag",
     "internal_solid_infill_speed": "150",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Max 0.4 nozzle.json

@@ -91,7 +91,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "130",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "10%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.15",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json

@@ -91,7 +91,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "zig-zag",
     "internal_solid_infill_speed": "100",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Plus 0.4 nozzle.json

@@ -91,7 +91,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "130",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "10%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.15",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Pro 0.4 nozzle.json

@@ -91,7 +91,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "130",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "10%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.15",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 0.4 nozzle.json

@@ -91,7 +91,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "zig-zag",
     "internal_solid_infill_speed": "130",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 0.4 nozzle.json

@@ -90,7 +90,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "250",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "10%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.15",

resources/profiles/Anycubic/process/0.24mm Draft @Anycubic Kobra 3 0.4 nozzle.json

@@ -91,7 +91,7 @@
     "internal_solid_infill_line_width": "0.45",
     "internal_solid_infill_pattern": "zig-zag",
     "internal_solid_infill_speed": "200",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Anycubic/process/0.28mm Draft @Anycubic Kobra 2 Pro 0.4 nozzle.json

@@ -91,7 +91,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "120",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "10%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.15",

resources/profiles/Anycubic/process/0.28mm SuperDraft @Anycubic Kobra 3 0.4 nozzle.json

@@ -91,7 +91,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "zig-zag",
     "internal_solid_infill_speed": "180",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 0.6 nozzle.json

@@ -91,7 +91,7 @@
     "internal_solid_infill_line_width": "0.62",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "150",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 0.8 nozzle.json

@@ -91,7 +91,7 @@
     "internal_solid_infill_line_width": "0.82",
     "internal_solid_infill_pattern": "zig-zag",
     "internal_solid_infill_speed": "150",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle.json

@@ -101,7 +101,7 @@
     "internal_solid_infill_acceleration": "100%",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "300",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.2 nozzle.json

@@ -93,7 +93,7 @@
     "internal_solid_infill_line_width": "0.22",
     "internal_solid_infill_pattern": "zig-zag",
     "internal_solid_infill_speed": "150",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.4 nozzle.json

@@ -98,7 +98,7 @@
     "internal_bridge_speed": "150%",
     "internal_solid_infill_acceleration": "100%",
     "internal_solid_infill_pattern": "monotonic",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Artillery/process/0.12mm Fine @Artillery M1 Pro 0.4 nozzle.json

@@ -99,7 +99,7 @@
     "internal_solid_infill_acceleration": "100%",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "300",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Artillery/process/0.12mm High Quality @Artillery M1 Pro 0.4 nozzle.json

@@ -99,7 +99,7 @@
     "internal_bridge_speed": "150%",
     "internal_solid_infill_acceleration": "100%",
     "internal_solid_infill_pattern": "monotonic",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Artillery/process/0.16mm High Quality @Artillery M1 Pro 0.4 nozzle.json

@@ -100,7 +100,7 @@
     "internal_bridge_speed": "150%",
     "internal_solid_infill_acceleration": "100%",
     "internal_solid_infill_pattern": "monotonic",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Artillery/process/0.16mm Optimal @Artillery M1 Pro 0.4 nozzle.json

@@ -102,7 +102,7 @@
     "internal_bridge_speed": "150%",
     "internal_solid_infill_acceleration": "100%",
     "internal_solid_infill_pattern": "monotonic",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Artillery/process/0.20mm Standard @Artillery M1 Pro 0.4 nozzle.json

@@ -103,7 +103,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "250",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json

@@ -87,7 +87,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "150",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json

@@ -87,7 +87,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "150",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json

@@ -87,7 +87,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "300",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json

@@ -87,7 +87,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "300",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Artillery/process/0.20mm Strength @Artillery M1 Pro 0.4 nozzle.json

@@ -98,7 +98,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "300",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.4 nozzle.json

@@ -96,7 +96,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "300",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.6 nozzle.json

@@ -93,7 +93,7 @@
     "internal_solid_infill_line_width": "0.62",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "150",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.8 nozzle.json

@@ -93,7 +93,7 @@
     "internal_solid_infill_line_width": "0.82",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "150",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle.json

@@ -99,7 +99,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "300",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/CoLiDo/process/fdm_process_colidodiy40_common.json

@@ -87,7 +87,7 @@
     "internal_solid_infill_line_width": "0.4",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "250",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "10%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.15",

resources/profiles/CoLiDo/process/fdm_process_colidox16_common.json

@@ -94,7 +94,7 @@
     "internal_solid_infill_line_width": "0.4",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "90",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "10%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.15",

resources/profiles/Comgrow/process/fdm_process_comgrow_common.json

@@ -76,7 +76,7 @@
     "internal_solid_infill_line_width": "0",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "200",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.25",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json

@@ -89,7 +89,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "500",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Creality/process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json

@@ -89,7 +89,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "500",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Cubicon/process/process template @Cubicon xCeler-I 0.4 nozzle.json

@@ -104,7 +104,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "zig-zag",
     "internal_solid_infill_speed": "250",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "10%",
     "ironing_inset": "0",
     "ironing_pattern": "zig-zag",

resources/profiles/Eryone/process/0.20mm Standard @Thinker X400.json

@@ -80,7 +80,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "250",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "10%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.15",

resources/profiles/Flashforge/process/0.20mm Standard @Flashforge G3U 0.4 Nozzle.json

@@ -83,7 +83,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "250",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Ginger Additive/process/fdm_process_common.json

@@ -84,7 +84,7 @@
     "internal_solid_infill_line_width": "3",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "100",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "10%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.1",

resources/profiles/Phrozen/process/0.20mm Standard @Phrozen Arco 0.4 nozzle.json

@@ -90,7 +90,7 @@
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_pattern": "monotonic",
     "internal_solid_infill_speed": "250",
-    "ironing_angle": "-1",
+    "ironing_angle": "0",
     "ironing_flow": "10%",
     "ironing_pattern": "zig-zag",
     "ironing_spacing": "0.15",