juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-20 03:43:52 +00:00
Code Issues Packages Projects Releases Wiki Activity

Standard units don't need translation (#9965)

Browse Source
This commit is contained in:
Alexandre Folle de Menezes
2025-06-22 04:10:40 -03:00
committed by GitHub
parent bd1281954d
commit fa70582ed1
35 changed files with 434 additions and 429 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
localization/i18n/zh_TW/OrcaSlicer_zh_TW.po
View File

@@ -12272,13 +12272,14 @@ msgstr "擠出頭最大可列印的層高。用於限制開啟自適應層高時
msgid "Extrusion rate smoothing"
msgstr "平滑擠出率"
#, fuzzy
msgid ""
"This parameter smooths out sudden extrusion rate changes that happen when "
"the printer transitions from printing a high flow (high speed/larger width) "
"extrusion to a lower flow (lower speed/smaller width) extrusion and vice "
"versa.\n"
"\n"
"It defines the maximum rate by which the extruded volumetric flow in mm3/sec "
"It defines the maximum rate by which the extruded volumetric flow in mm³/s² "
"can change over time. Higher values mean higher extrusion rate changes are "
"allowed, resulting in faster speed transitions.\n"
"\n"
@@ -12288,13 +12289,13 @@ msgid ""
"Voron) this value is usually not needed. However it can provide some "
"marginal benefit in certain cases where feature speeds vary greatly. For "
"example, when there are aggressive slowdowns due to overhangs. In these "
"cases a high value of around 300-350mm3/s2 is recommended as this allows for "
"just enough smoothing to assist pressure advance achieve a smoother flow "
"cases a high value of around 300-350 mm³/s² is recommended as this allows "
"for just enough smoothing to assist pressure advance achieve a smoother flow "
"transition.\n"
"\n"
"For slower printers without pressure advance, the value should be set much "
"lower. A value of 10-15mm3/s2 is a good starting point for direct drive "
"extruders and 5-10mm3/s2 for Bowden style.\n"
"lower. A value of 10-15 mm³/s² is a good starting point for direct drive "
"extruders and 5-10 mm³/s² for Bowden style.\n"
"\n"
"This feature is known as Pressure Equalizer in Prusa slicer.\n"
"\n"
@@ -13880,6 +13881,7 @@ msgstr "圓錐體頂點處的角度，用於穩定換料塔。 更大的角度
msgid "Maximum wipe tower print speed"
msgstr "換料塔最快列印速度"
#, fuzzy
msgid ""
"The maximum print speed when purging in the wipe tower and printing the wipe "
"tower sparse layers. When purging, if the sparse infill speed or calculated "
@@ -13894,7 +13896,7 @@ msgid ""
"the force with which the nozzle collides with any blobs that may have formed "
"on the wipe tower.\n"
"\n"
"Before increasing this parameter beyond the default of 90mm/sec, make sure "
"Before increasing this parameter beyond the default of 90 mm/s, make sure "
"your printer can reliably bridge at the increased speeds and that ooze when "
"tool changing is well controlled.\n"
"\n"
@@ -13909,7 +13911,7 @@ msgstr ""
"\n"
"提高此速度可能會影響塔的穩定性，並增加噴嘴與換料塔上斑點的碰撞力。\n"
"\n"
"在將此參數提高於預設值 90mm/sec 以上之前，請確保您的印表設備能夠可靠地在更高"
"在將此參數提高於預設值 90mm/s 以上之前，請確保您的印表設備能夠可靠地在更高"
"的速度下橋接，並且工具更換時的溢出能良好的被控制。\n"
"\n"
"對於換料塔外部周邊，無論此設定如何，都使用內部周邊速度。"