juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-20 11:53:48 +00:00
Code Issues Packages Projects Releases Wiki Activity

Standard units don't need translation (#9965)

Browse Source
This commit is contained in:
Alexandre Folle de Menezes
2025-06-22 04:10:40 -03:00
committed by GitHub
parent bd1281954d
commit fa70582ed1
35 changed files with 434 additions and 429 deletions
Download Patch File Download Diff File Expand all files Collapse all files

15
localization/i18n/zh_CN/OrcaSlicer_zh_CN.po
View File

@@ -12033,13 +12033,14 @@ msgstr "挤出头最大可打印的层高。用于限制开启自适应层高时
msgid "Extrusion rate smoothing"
msgstr "平滑挤出率"
#, fuzzy
msgid ""
"This parameter smooths out sudden extrusion rate changes that happen when "
"the printer transitions from printing a high flow (high speed/larger width) "
"extrusion to a lower flow (lower speed/smaller width) extrusion and vice "
"versa.\n"
"\n"
"It defines the maximum rate by which the extruded volumetric flow in mm3/sec "
"It defines the maximum rate by which the extruded volumetric flow in mm³/s² "
"can change over time. Higher values mean higher extrusion rate changes are "
"allowed, resulting in faster speed transitions.\n"
"\n"
@@ -12049,13 +12050,13 @@ msgid ""
"Voron) this value is usually not needed. However it can provide some "
"marginal benefit in certain cases where feature speeds vary greatly. For "
"example, when there are aggressive slowdowns due to overhangs. In these "
"cases a high value of around 300-350mm3/s2 is recommended as this allows for "
"just enough smoothing to assist pressure advance achieve a smoother flow "
"cases a high value of around 300-350 mm³/s² is recommended as this allows "
"for just enough smoothing to assist pressure advance achieve a smoother flow "
"transition.\n"
"\n"
"For slower printers without pressure advance, the value should be set much "
"lower. A value of 10-15mm3/s2 is a good starting point for direct drive "
"extruders and 5-10mm3/s2 for Bowden style.\n"
"lower. A value of 10-15 mm³/s² is a good starting point for direct drive "
"extruders and 5-10 mm³/s² for Bowden style.\n"
"\n"
"This feature is known as Pressure Equalizer in Prusa slicer.\n"
"\n"
@@ -12074,7 +12075,7 @@ msgstr ""
"够的平滑，以帮助压力提前实现更平滑的流量过渡。\n"
"\n"
"对于没有压力提前的较慢打印机，该值应该设置得非常低。对于近程挤出机来说10-15 "
"mm3/s2是一个很好值的起点，而对于远程挤出机来说是5-10 mm3/s2。\n"
"mm³/s²是一个很好值的起点，而对于远程挤出机来说是5-10 mm³/s²。\n"
"\n"
"这个功能在Prusa切片机中被称为压力均衡器。\n"
"\n"
@@ -13624,7 +13625,7 @@ msgid ""
"the force with which the nozzle collides with any blobs that may have formed "
"on the wipe tower.\n"
"\n"
"Before increasing this parameter beyond the default of 90mm/sec, make sure "
"Before increasing this parameter beyond the default of 90 mm/s, make sure "
"your printer can reliably bridge at the increased speeds and that ooze when "
"tool changing is well controlled.\n"
"\n"