juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-14 00:52:04 +00:00
Code Issues Packages Projects Releases Wiki Activity

Standard units don't need translation (#9965)

Browse Source
This commit is contained in:
Alexandre Folle de Menezes
2025-06-22 04:10:40 -03:00
committed by GitHub
parent bd1281954d
commit fa70582ed1
35 changed files with 434 additions and 429 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
localization/i18n/ko/OrcaSlicer_ko.po
View File

@@ -12686,7 +12686,7 @@ msgid ""
"extrusion to a lower flow (lower speed/smaller width) extrusion and vice "
"versa.\n"
"\n"
"It defines the maximum rate by which the extruded volumetric flow in mm3/sec "
"It defines the maximum rate by which the extruded volumetric flow in mm³/s² "
"can change over time. Higher values mean higher extrusion rate changes are "
"allowed, resulting in faster speed transitions.\n"
"\n"
@@ -12696,12 +12696,12 @@ msgid ""
"Voron) this value is usually not needed. However it can provide some marginal "
"benefit in certain cases where feature speeds vary greatly. For example, when "
"there are aggressive slowdowns due to overhangs. In these cases a high value "
"of around 300-350mm3/s2 is recommended as this allows for just enough "
"of around 300-350 mm³/s² is recommended as this allows for just enough "
"smoothing to assist pressure advance achieve a smoother flow transition.\n"
"\n"
"For slower printers without pressure advance, the value should be set much "
"lower. A value of 10-15mm3/s2 is a good starting point for direct drive "
"extruders and 5-10mm3/s2 for Bowden style.\n"
"lower. A value of 10-15 mm³/s² is a good starting point for direct drive "
"extruders and 5-10 mm³/s² for Bowden style.\n"
"\n"
"This feature is known as Pressure Equalizer in Prusa slicer.\n"
"\n"
@@ -12720,13 +12720,13 @@ msgstr ""
"고속, 고압출량 직접 구동 프린터(예: 뱀부랩 또는 보론)의 경우 일반적으로 이 값"
"이 필요하지 않습니다. 그러나 기능 속도가 크게 달라지는 특정 경우에는 약간의 이"
"점을 제공할 수 있습니다. 예를 들어 오버행로 인해 급격하게 감속이 발생하는 경우"
"입니다. 이러한 경우 약 300-350mm3/s2의 높은 값이 권장됩니다. 이렇게 하면 프레"
"입니다. 이러한 경우 약 300-350 mm³/s²의 높은 값이 권장됩니다. 이렇게 하면 프레"
"셔 어드밴스가 더 부드러운 압출량 전환을 달성하는 데 도움이 될 만큼 충분히 매끄"
"러워질 수 있기 때문입니다.\n"
"\n"
"프레셔 어드밴스 기능이 없는 느린 프린터의 경우 값을 훨씬 낮게 설정해야 합니"
"다. 10-15mm3/s2 값은 직접 구동 압출기의 좋은 시작점이고 보우덴 스타일의 경우 "
"5-10mm3/s2입니다.\n"
"다. 10-15 mm³/s² 값은 직접 구동 압출기의 좋은 시작점이고 보우덴 스타일의 경우 "
"5-10 mm³/s²입니다.\n"
"\n"
"이 기능은 Prusa 슬라이서에서는 프레셔 이퀄라이저(Pressure Equalizer)로 알려져 "
"있습니다.\n"
@@ -14419,7 +14419,7 @@ msgid ""
"the force with which the nozzle collides with any blobs that may have formed "
"on the wipe tower.\n"
"\n"
"Before increasing this parameter beyond the default of 90mm/sec, make sure "
"Before increasing this parameter beyond the default of 90 mm/s, make sure "
"your printer can reliably bridge at the increased speeds and that ooze when "
"tool changing is well controlled.\n"
"\n"