juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-20 03:43:52 +00:00
Code Issues Packages Projects Releases Wiki Activity

Standard units don't need translation (#9965)

Browse Source
This commit is contained in:
Alexandre Folle de Menezes
2025-06-22 04:10:40 -03:00
committed by GitHub
parent bd1281954d
commit fa70582ed1
35 changed files with 434 additions and 429 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
localization/i18n/de/OrcaSlicer_de.po
View File

@@ -13372,7 +13372,7 @@ msgid ""
"extrusion to a lower flow (lower speed/smaller width) extrusion and vice "
"versa.\n"
"\n"
"It defines the maximum rate by which the extruded volumetric flow in mm3/sec "
"It defines the maximum rate by which the extruded volumetric flow in mm³/s² "
"can change over time. Higher values mean higher extrusion rate changes are "
"allowed, resulting in faster speed transitions.\n"
"\n"
@@ -13382,13 +13382,13 @@ msgid ""
"Voron) this value is usually not needed. However it can provide some "
"marginal benefit in certain cases where feature speeds vary greatly. For "
"example, when there are aggressive slowdowns due to overhangs. In these "
"cases a high value of around 300-350mm3/s2 is recommended as this allows for "
"just enough smoothing to assist pressure advance achieve a smoother flow "
"cases a high value of around 300-350 mm³/s² is recommended as this allows "
"for just enough smoothing to assist pressure advance achieve a smoother flow "
"transition.\n"
"\n"
"For slower printers without pressure advance, the value should be set much "
"lower. A value of 10-15mm3/s2 is a good starting point for direct drive "
"extruders and 5-10mm3/s2 for Bowden style.\n"
"lower. A value of 10-15 mm³/s² is a good starting point for direct drive "
"extruders and 5-10 mm³/s² for Bowden style.\n"
"\n"
"This feature is known as Pressure Equalizer in Prusa slicer.\n"
"\n"
@@ -13411,7 +13411,7 @@ msgstr ""
"erforderlich. Er kann jedoch in bestimmten Fällen einen geringfügigen "
"Vorteil bieten, in denen sich die Funktionen stark unterscheiden. Zum "
"Beispiel, wenn es aggressive Verlangsamungen aufgrund von Überhängen gibt. "
"In diesen Fällen wird ein hoher Wert von ca. 300-350mm3/s2 empfohlen, da "
"In diesen Fällen wird ein hoher Wert von ca. 300-350 mm³/s² empfohlen, da "
msgid "mm³/s²"
msgstr ""
@@ -15244,7 +15244,7 @@ msgid ""
"the force with which the nozzle collides with any blobs that may have formed "
"on the wipe tower.\n"
"\n"
"Before increasing this parameter beyond the default of 90mm/sec, make sure "
"Before increasing this parameter beyond the default of 90 mm/s, make sure "
"your printer can reliably bridge at the increased speeds and that ooze when "
"tool changing is well controlled.\n"
"\n"
@@ -19600,7 +19600,7 @@ msgstr ""
#~ "is lower, the lowest speed will be used instead.\n"
#~ "Increasing this speed may affect the tower's stability, as purging can be "
#~ "performed over sparse layers. Before increasing this parameter beyond the "
#~ "default of 90mm/sec, make sure your printer can reliably bridge at the "
#~ "default of 90 mm/s, make sure your printer can reliably bridge at the "
#~ "increased speeds."
#~ msgstr ""
#~ "Die maximale Druckgeschwindigkeit beim Reinigen im Reinigungsturm. Wenn "