Repair shipped default materials and obsolete settings, and validate them (#15741)

* add orca profile skill * add default material check Improve validation for default materials and filament profiles * Fix default materials and obsolete keys * clarifying orca-profiles skill
2026-09-27 19:01:02 +00:00 · 2026-09-18 00:39:46 +08:00
parent 60b4a61854
commit f520e9221f
2135 changed files with 85633 additions and 87858 deletions
@@ -11,8 +11,6 @@
 	"outer_wall_acceleration": "2000",
 	"outer_wall_speed": "60",
 	"sparse_infill_pattern": "gyroid",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],
@@ -6,8 +6,6 @@
 	"setting_id": "Tayg0K1WRyJMLoke",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
@@ -11,8 +11,6 @@
 	"outer_wall_acceleration": "2000",
 	"outer_wall_speed": "60",
 	"sparse_infill_pattern": "gyroid",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],
@@ -15,8 +15,6 @@
 	"sparse_infill_pattern": "gyroid",
 	"sparse_infill_speed": "150",
 	"top_surface_speed": "150",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],
@@ -11,8 +11,6 @@
 	"outer_wall_acceleration": "2000",
 	"outer_wall_speed": "60",
 	"sparse_infill_pattern": "gyroid",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],
@@ -6,8 +6,6 @@
 	"setting_id": "xBU1j8ldOefYfosp",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
@@ -15,8 +15,6 @@
 	"sparse_infill_pattern": "gyroid",
 	"sparse_infill_speed": "180",
 	"top_surface_speed": "150",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],
@@ -15,8 +15,6 @@
 	"sparse_infill_pattern": "gyroid",
 	"sparse_infill_speed": "200",
 	"top_surface_speed": "150",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
@@ -6,8 +6,6 @@
 	"setting_id": "ERcgRLp5bQo1hgz8",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
@@ -6,8 +6,6 @@
 	"setting_id": "BBXxXQCXCme2Mvy0",
 	"instantiation": "true",
 	"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
@@ -6,8 +6,6 @@
 	"setting_id": "XR5r9SuWmSag5Qjo",
 	"instantiation": "true",
 	"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
@@ -17,8 +17,6 @@
 	"internal_solid_infill_line_width": "105%",
 	"support_line_width": "105%",
 	"top_surface_line_width": "105%",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"ooze_prevention": "1",
 	"prime_tower_width": "30",
 	"slowdown_for_curled_perimeters": "0",
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Standard 0.2 mm layer height profile for the Snapmaker U1 with 0.6 mm nozzles. Balances print speed and surface quality for everyday prints.",
 	"layer_height": "0.20",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
@@ -8,8 +8,6 @@
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
 	"outer_wall_speed": "60",
 	"sparse_infill_density": "25%",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"wall_loops": "6",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
@@ -6,8 +6,6 @@
 	"setting_id": "4whjHJVCN44w8SPE",
 	"instantiation": "true",
 	"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
@@ -6,8 +6,6 @@
 	"setting_id": "MYRo7jTenu7F0Zv4",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
 	],
@@ -6,8 +6,6 @@
 	"setting_id": "0fSeyAIS6z75A1r3",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Fast draft profile for the Snapmaker U1 with 0.6 mm nozzles. 0.3 mm layer height for quick prototypes and functional parts.",
 	"layer_height": "0.30",
-	"smooth_coefficient": "80",
-	"overhang_totally_speed": "40",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
@@ -9,8 +9,6 @@
 	"elefant_foot_compensation": "0.15",
 	"sparse_infill_density": "25%",
 	"wall_loops": "4",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
 	],
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Maximum-speed profile for the Snapmaker U1 with 0.6 mm nozzles. 0.4 mm layer height for rapid prototyping where surface finish is not critical.",
 	"layer_height": "0.40",
-	"smooth_coefficient": "80",
-	"overhang_totally_speed": "30",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
 	],
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
 	],
@@ -7,8 +7,6 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
-	"smooth_coefficient": "150",
-	"overhang_totally_speed": "50",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
 	],
@@ -3,7 +3,6 @@
 	"name": "fdm_process_U1",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"reduce_crossing_wall": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "25",
@@ -66,7 +65,5 @@
 	"prime_tower_width": "60",
 	"xy_hole_compensation": "0",
 	"xy_contour_compensation": "0",
-	"compatible_printers": [],
-	"smooth_coefficient": "80",
-	"overhang_totally_speed": "24"
+	"compatible_printers": []
 }
@@ -17,7 +17,6 @@
 	"outer_wall_acceleration": "5000",
 	"wall_infill_order": "inner wall/outer wall/infill",
 	"line_width": "0.42",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_acceleration": "500",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_speed": "30",
@@ -3,7 +3,6 @@
 	"name": "fdm_process_common",
 	"from": "system",
 	"instantiation": "false",
-	"adaptive_layer_height": "0",
 	"layer_height": "0.2",
 	"initial_layer_print_height": "0.3",
 	"line_width": "0.42",
@@ -72,7 +71,6 @@
 	"infill_combination": "0",
 	"detect_narrow_internal_solid_infill": "1",
 	"ensure_vertical_shell_thickness": "1",
-	"internal_bridge_support_thickness": "0.8",
 	"initial_layer_speed": "50",
 	"initial_layer_infill_speed": "50",
 	"initial_layer_travel_speed": "80%",
@@ -86,7 +84,6 @@
 	"support_interface_speed": "50",
 	"ironing_speed": "35",
 	"enable_overhang_speed": "1",
-	"overhang_speed_classic": "0",
 	"overhang_1_4_speed": "35",
 	"overhang_2_4_speed": "25",
 	"overhang_3_4_speed": "15",
@@ -129,7 +126,6 @@
 	"tree_support_adaptive_layer_height": "1",
 	"tree_support_auto_brim": "1",
 	"tree_support_brim_width": "3",
-	"tree_support_with_infill": "0",
 	"support_top_z_distance": "0.12",
 	"support_bottom_z_distance": "0.12",
 	"support_base_pattern": "rectilinear",