tidy up and bump profile version (#12889)

* tidy up and bump profile version

* fix error

* tidy up

* fix

* tide up more

* fix errors

* fix more errors

resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json

@@ -101,7 +101,7 @@
     "top_shell_thickness": "0.8",
     "travel_acceleration": "12000",
     "travel_speed": "500",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.10mm HighDetail @Creality CR-M4.json

@@ -92,7 +92,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "50",
     "travel_speed": "100",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json

@@ -101,7 +101,7 @@
     "top_shell_thickness": "0.8",
     "travel_acceleration": "12000",
     "travel_speed": "500",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json

@@ -101,7 +101,7 @@
     "top_shell_thickness": "0.8",
     "travel_acceleration": "12000",
     "travel_speed": "500",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "50",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "200",
     "sparse_infill_speed": "300",
     "travel_speed": "400",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "200",
     "sparse_infill_speed": "300",
     "travel_speed": "400",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "200",
     "sparse_infill_speed": "300",
     "travel_speed": "400",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "200",
     "sparse_infill_speed": "300",
     "travel_speed": "400",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.2.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.4.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.6.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.8.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "50",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "50",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json

@@ -109,7 +109,7 @@
     "top_shell_thickness": "0.6",
     "travel_acceleration": "12000",
     "travel_speed": "500",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json

@@ -99,7 +99,7 @@
     "gap_infill_speed": "200",
     "sparse_infill_speed": "300",
     "travel_speed": "400",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "role_based_wipe_speed": "0",
     "wipe_speed": "200",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json

@@ -109,7 +109,7 @@
     "top_shell_thickness": "0.6",
     "travel_acceleration": "8000",
     "travel_speed": "500",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "50",
     "sparse_infill_speed": "180",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "50",
     "sparse_infill_speed": "180",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "50",
     "sparse_infill_speed": "180",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "50",
     "sparse_infill_speed": "180",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "50",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json

@@ -109,7 +109,7 @@
     "top_shell_thickness": "0.6",
     "travel_acceleration": "12000",
     "travel_speed": "500",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json

@@ -109,7 +109,7 @@
     "top_shell_thickness": "0.6",
     "travel_acceleration": "12000",
     "travel_speed": "500",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json

@@ -109,7 +109,7 @@
     "top_shell_thickness": "0.6",
     "travel_acceleration": "12000",
     "travel_speed": "500",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json

@@ -106,7 +106,7 @@
     "top_shell_thickness": "0.6",
     "travel_acceleration": "12000",
     "travel_speed": "500",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json

@@ -101,7 +101,7 @@
     "top_shell_thickness": "0.8",
     "travel_acceleration": "12000",
     "travel_speed": "500",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.15mm Detail @Creality CR-M4.json

@@ -92,7 +92,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "50",
     "travel_speed": "100",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "50",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "50",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "50",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "200",
     "sparse_infill_speed": "300",
     "travel_speed": "400",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "200",
     "sparse_infill_speed": "300",
     "travel_speed": "400",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "200",
     "sparse_infill_speed": "300",
     "travel_speed": "400",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "200",
     "sparse_infill_speed": "300",
     "travel_speed": "400",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "50",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json

@@ -109,7 +109,7 @@
     "top_shell_thickness": "0.6",
     "travel_acceleration": "12000",
     "travel_speed": "500",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json

@@ -99,7 +99,7 @@
     "gap_infill_speed": "200",
     "sparse_infill_speed": "300",
     "travel_speed": "400",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "role_based_wipe_speed": "0",
     "wipe_speed": "200",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json

@@ -109,7 +109,7 @@
     "top_shell_thickness": "0.6",
     "travel_acceleration": "8000",
     "travel_speed": "500",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "50",
     "sparse_infill_speed": "180",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "50",
     "sparse_infill_speed": "180",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "50",
     "sparse_infill_speed": "180",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "50",
     "sparse_infill_speed": "180",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json

@@ -109,7 +109,7 @@
     "top_shell_thickness": "0.6",
     "travel_acceleration": "12000",
     "travel_speed": "500",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json

@@ -109,7 +109,7 @@
     "top_shell_thickness": "0.6",
     "travel_acceleration": "12000",
     "travel_speed": "500",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json

@@ -109,7 +109,7 @@
     "top_shell_thickness": "0.6",
     "travel_acceleration": "12000",
     "travel_speed": "500",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json

@@ -106,7 +106,7 @@
     "top_shell_thickness": "0.6",
     "travel_acceleration": "12000",
     "travel_speed": "500",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json

@@ -101,7 +101,7 @@
     "top_shell_thickness": "0.8",
     "travel_acceleration": "12000",
     "travel_speed": "500",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality CR-M4.json

@@ -92,7 +92,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "50",
     "travel_speed": "100",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "50",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "200",
     "sparse_infill_speed": "300",
     "travel_speed": "400",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "200",
     "sparse_infill_speed": "300",
     "travel_speed": "400",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "200",
     "sparse_infill_speed": "300",
     "travel_speed": "400",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json

@@ -100,7 +100,7 @@
     "gap_infill_speed": "200",
     "sparse_infill_speed": "300",
     "travel_speed": "400",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality CR10V3 0.4.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality CR10V3 0.6.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json

@@ -40,7 +40,7 @@
     "elefant_foot_compensation_layers": "1",
     "enable_arc_fitting": "0",
     "enable_overhang_speed": "1",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "enable_support": "0",
     "enforce_support_layers": "0",
     "ensure_vertical_shell_thickness": "ensure_all",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.2.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.4.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.6.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.8.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "60",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "50",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json

@@ -97,7 +97,7 @@
     "gap_infill_speed": "30",
     "sparse_infill_speed": "50",
     "travel_speed": "150",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",