juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-19 19:33:47 +00:00
Code Issues Packages Projects Releases Wiki Activity

Update printer profiles for Artillery (#11284)

Browse Source 
* Update printer profiles for Artillery

* Revert "Update printer profiles for Artillery"

This reverts commit 5dc7083089.

* Update printer profiles for Artillery

* Update printer profiles for Artillery

* resolve workflow failures in profile validation

* resolve workflow failures in profile validation
This commit is contained in:
artillerylab
2025-11-25 21:27:35 +08:00
committed by GitHub
parent 855870e256
commit f3e486c1a9
109 changed files with 798 additions and 584 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
resources/profiles/Artillery/machine/Artillery M1 Pro 0.2 nozzle.json
View File

@@ -48,6 +48,7 @@
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"is_custom_defined": "0",
"layer_change_gcode": "G92 E0\n{if layer_num==2}\n\n;filter_fan\nM106 P3 S{during_print_exhaust_fan_speed[0]*255/100.0};\n\n;auxiliary_fan\nM106 P2 S{additional_cooling_fan_speed[0]*255/100.0}\n\n{endif}\n\n\n",
"long_retractions_when_cut": [
"0"
@@ -455,6 +456,7 @@
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"version": "2.1.1.0",
"wipe": [
"0"
],

6
resources/profiles/Artillery/machine/Artillery M1 Pro 0.4 nozzle.json
View File

@@ -7,8 +7,9 @@
"instantiation": "true",
"is_artillery": "1",
"emit_machine_limits_to_gcode": "1",
"is_custom_defined": "0",
"layer_change_gcode": "G92 E0\n{if layer_num==2}\n\n;filter_fan\nM106 P3 S{during_print_exhaust_fan_speed[0]*255/100.0};\n\n;auxiliary_fan\nM106 P2 S{additional_cooling_fan_speed[0]*255/100.0}\n\n{endif}\n\n",
"machine_end_gcode": ";===== G-CODE START =====================\n;===== machine: M1 PRO =========================\n;===== date: 20250729 =====================\n\n;===== Raise Z-Axis =====================\nM400 ; wait for buffer to clear\nG90\nG92 E0 ; zero the extruder\nG1 E-3 F1800 ; retract\n\n{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F300 ; Move print head up{endif} \nG1 X260 Y250 F3600 ; move to safe pos \nM400\nTIMELAPSE_TAKE_FRAME\n{if max_layer_z < 50}G1 Z50 F300 ; Move print head further up{endif}\n;===== Default Settings =====================\nM400\nM106 S255\nM141 S0\nM106 P1 S255\nM104 S160\nG4 P10000\nM109 S160\nM106 S0 ;turn off cool fan\nM141 S0 ;turn off PTC\nM106 P2 S0 ;turn off chamber fan\nM106 P1 S0 ;turn off PTC fan\nM106 P3 S0 ;turn off filter fan\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nSET_VELOCITY_LIMIT VELOCITY=500;\nSET_VELOCITY_LIMIT ACCEL=6000;\nSET_VELOCITY_LIMIT MINIMUM_CRUISE_RATIO=0.2;\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=5;\nG21; set units to millimeters\nM104 S0\nM140 S0\nM400\nM84 X Y Z E ; disable motors\nM400\n;===== G-CODE END =====================",
"machine_end_gcode": ";===== G-CODE START =====================\n;===== machine: M1 PRO =========================\n;===== date: 20250729 =====================\n\n;===== Raise Z-Axis =====================\nM400 ; wait for buffer to clear\nG90\nG92 E0 ; zero the extruder\nG1 E-3 F1800 ; retract\n\n{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F300 ; Move print head up{endif} \nG90\nG1 X200 Y260 F21000\nG1 X200 Y275 F6000\nG1 X160 Y275 F6000\nG1 X137 Y275 F3000\nM400\nTIMELAPSE_TAKE_FRAME\n{if max_layer_z < 50}G1 Z50 F300 ; Move print head further up{endif}\n;===== Default Settings =====================\nM400\nM106 S255\nM141 S0\nM106 P1 S255\nM104 S160\nG4 P10000\nM109 S160\nM106 S0 ;turn off cool fan\nM141 S0 ;turn off PTC\nM106 P2 S0 ;turn off chamber fan\nM106 P1 S0 ;turn off PTC fan\nM106 P3 S0 ;turn off filter fan\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nSET_VELOCITY_LIMIT VELOCITY=500;\nSET_VELOCITY_LIMIT ACCEL=6000;\nSET_VELOCITY_LIMIT MINIMUM_CRUISE_RATIO=0.2;\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=5;\nG21; set units to millimeters\nM104 S0\nM140 S0\nM400\nM84 X Y Z E ; disable motors\nM400\n;===== G-CODE END =====================",
"machine_max_acceleration_extruding": [
"20000",
"1250"
@@ -57,7 +58,7 @@
"20",
"12"
],
"machine_start_gcode": ";===== START G-CODE =====================\n;===== machine: M1 PRO =========================\n;===== size: X260 Y260 Z260 =====================\n;===== date: 20250708 =====================\n;===== Filament Temperature Configuration =====================\n;Nozzle_Preheat_Temp:140\n;Bed_Preheat_Temp:[bed_temperature_initial_layer_single]\n{if (nozzle_temperature_initial_layer[0] >250)};Filament_Common_Extrusion_Temp:[nozzle_temperature_initial_layer]{else};Filament_Common_Extrusion_Temp:250{endif}\n;Nozzle_Init_Layer_Temp:[nozzle_temperature_initial_layer]\n;Filament_Softening_Temp:[nozzle_temperature_range_low]\n\n;===== Default Settings =====================\nM106 S0 ;turn off cool fan\nM141 S0 ;turn off PTC\nM106 P2 S0 ;turn off chamber fan\nM106 P1 S0 ;turn off PTC fan\nM106 P3 S0 ;turn off filter fan\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nSET_VELOCITY_LIMIT VELOCITY=500;\nSET_VELOCITY_LIMIT ACCEL=6000;\nSET_VELOCITY_LIMIT MINIMUM_CRUISE_RATIO=0.2;\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=5;\nG21; set units to millimeters\nG90\n\n;===== Preheat While Zeroing =====================\nM106 P1 S153\n\nM140 S[bed_temperature_initial_layer_single];\n\n{if filament_type[initial_no_support_extruder]==\"ABS\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"PC\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"ASA\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"PA\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"PA-CF\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\nM106 P2 S0\nM106 S0;\nG4 P500\n\n;===== Wait heating =====================\nG28\nG1 X20 Y5.8 Z0.2 F18000\n\n;===== Set Print Temperature =====================\nM106 S120;\nG4 P500\nM104 S[first_layer_temperature];\n\n{if (bed_temperature_initial_layer_single >0)}\nM190 S[bed_temperature_initial_layer_single];\n{else}\nM140 S[bed_temperature_initial_layer_single];\n{endif}\n\nM109 S[first_layer_temperature];\nM106 S0;\nG4 P500\n\n;===== Wipe Nozzle Extrude Line =====================\nG1 X80 Y-0.5 Z5 F18000\nM400\nG1 X80 Y-0.5 Z0.3 F600\nM400\n\nG92 E0\nG1 Z0.3 E8 F300\nM400\n\nG92 E0\nG1 X180 Y-0.5 Z0.3 F1800.0 E10.0;draw line\n\nG92 E0\nG1 X180 Y-2 Z0.3 F1800.0 E0.15;draw line\n\nG92 E0\nG1 X90 Y-2 Z0.3 F1800.0 E9;draw line\n\nG92 E0\nG1 X90 Y0 Z0.2 E0.2 F1800;\n\nG92 E0\nG1 Z0.6 F600\nM400\n\nG1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} F9000\nM400\n\n;===== END G-CODE =====================\n\n\n\n",
"machine_start_gcode":";===== START G-CODE =====================\n;===== machine: M1 PRO =========================\n;===== size: X260 Y260 Z260 =====================\n;===== date: 20250708 =====================\n;===== Filament Temperature Configuration =====================\n;Nozzle_Preheat_Temp:140\n;Bed_Preheat_Temp:[bed_temperature_initial_layer_single]\n{if (nozzle_temperature_initial_layer[0] >250)};Filament_Common_Extrusion_Temp:[nozzle_temperature_initial_layer]{else};Filament_Common_Extrusion_Temp:250{endif}\n;Nozzle_Init_Layer_Temp:[nozzle_temperature_initial_layer]\n;Filament_Softening_Temp:[nozzle_temperature_range_low]\n\n;===== Default Settings =====================\nM106 S0 ;turn off cool fan\nM141 S0 ;turn off PTC\nM106 P2 S0 ;turn off chamber fan\nM106 P1 S0 ;turn off PTC fan\nM106 P3 S0 ;turn off filter fan\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nSET_VELOCITY_LIMIT VELOCITY=500;\nSET_VELOCITY_LIMIT ACCEL=6000;\nSET_VELOCITY_LIMIT MINIMUM_CRUISE_RATIO=0.2;\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=5;\nG21; set units to millimeters\nG90\n\n;===== Preheat While Zeroing =====================\nM106 P1 S153\n\nM140 S[bed_temperature_initial_layer_single];\n\n{if filament_type[initial_no_support_extruder]==\"ABS\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"PC\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"ASA\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"PA\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"PA-CF\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\nM106 P2 S0\nM106 S0;\nG4 P500\n\n;===== Wait heating =====================\nG28\nG1 X20 Y2 Z0 F18000\n\n;===== Set Print Temperature =====================\nM106 S120;\nG4 P500\nM104 S[first_layer_temperature];\n\n{if (bed_temperature_initial_layer_single >0)}\nM190 S[bed_temperature_initial_layer_single];\n{else}\nM140 S[bed_temperature_initial_layer_single];\n{endif}\n\nM109 S[first_layer_temperature];\nM106 S0;\nG4 P500\n\n;===== Wipe Nozzle Extrude Line =====================\nG1 X20 Y2 Z0 F18000\nM400\n\nG92 E0\nG0 E4;\nM400\n\nG92 E0\nG1 X240 Y2 Z0.2 F1800.0 E11.0;\n\nG92 E0\nG1 X240 Y10 Z0.2 F1800.0 E1;\n\nG92 E0\nG1 X239.5\nG0 E0.2\n\nG92 E0\nG0 Y2.5 E0.125\n\nG92 E0\nG1 X20 F1800.0 E11;\n\nM400\nG92 E0\nG1 Z0.6 F600\nM400\n\nG1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} F9000\nM400\n\n;===== END G-CODE =====================\n\n\n",
"print_host": "192.168.3.29",
"printable_area": [
"0x0",
@@ -69,6 +70,7 @@
"retraction_length": [
"1.3"
],
"version": "2.1.2.2",
"z_hop": [
"0.6"
],

2
resources/profiles/Artillery/machine/Artillery M1 Pro 0.6 nozzle.json
View File

@@ -48,6 +48,7 @@
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"is_custom_defined": "0",
"layer_change_gcode": "G92 E0\n{if layer_num==2}\n\n;filter_fan\nM106 P3 S{during_print_exhaust_fan_speed[0]*255/100.0};\n\n;auxiliary_fan\nM106 P2 S{additional_cooling_fan_speed[0]*255/100.0}\n\n{endif}\n\n\n",
"long_retractions_when_cut": [
"0"
@@ -455,6 +456,7 @@
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"version": "2.1.1.0",
"wipe": [
"0"
],

2
resources/profiles/Artillery/machine/Artillery M1 Pro 0.8 nozzle.json
View File

@@ -48,6 +48,7 @@
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"is_custom_defined": "0",
"layer_change_gcode": "G92 E0\n{if layer_num==2}\n\n;filter_fan\nM106 P3 S{during_print_exhaust_fan_speed[0]*255/100.0};\n\n;auxiliary_fan\nM106 P2 S{additional_cooling_fan_speed[0]*255/100.0}\n\n{endif}\n\n\n",
"long_retractions_when_cut": [
"0"
@@ -455,6 +456,7 @@
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"version": "2.1.1.0",
"wipe": [
"0"
],

2
resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json
View File

@@ -51,6 +51,7 @@
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"is_custom_defined": "0",
"layer_change_gcode": "",
"machine_end_gcode": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM211 S1",
"machine_load_filament_time": "0",
@@ -211,6 +212,7 @@
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"version": "2.0.2.0",
"wipe": [
"0"
],

2
resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json
View File

@@ -54,6 +54,7 @@
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"is_custom_defined": "0",
"layer_change_gcode": "",
"machine_end_gcode": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM211 S1",
"machine_load_filament_time": "0",
@@ -211,6 +212,7 @@
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"version": "2.0.2.0",
"wipe": [
"0"
],

2
resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json
View File

@@ -54,6 +54,7 @@
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"is_custom_defined": "0",
"layer_change_gcode": "G92 E0",
"machine_end_gcode": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 E-1 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X-5 Y305 F3000 ;Wipe out\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"machine_load_filament_time": "0",
@@ -211,6 +212,7 @@
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"version": "2.0.2.0",
"wipe": [
"0"
],

2
resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json
View File

@@ -54,6 +54,7 @@
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"is_custom_defined": "0",
"layer_change_gcode": "G92 E0",
"machine_end_gcode": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 E-1 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X-5 Y250 F3000 ;Wipe out\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"machine_load_filament_time": "0",
@@ -211,6 +212,7 @@
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"version": "2.0.2.0",
"wipe": [
"0"
],